Skip to content

Wall Murals Installed in West Park Homes

The short answer

We hang printed wall murals in West Park homes, including stock designs and custom prints. The process includes measuring before you order, repairing and priming the wall and aligning each panel so the image is seamless.

A wall mural can make a modest room feel much larger, give a child's bedroom a story or turn a plain dining wall into a conversation piece. In West Park, a small Broward County city where many homes have practical, compact layouts, murals are a clever way to add visual depth without moving a single wall. We install printed murals from our base in Miami Gardens, roughly six miles to the southwest, and we bring the same attention to every panel: careful measuring, smooth surfaces and an image that lines up perfectly from edge to edge.

Using a mural to open up a room

Images with a sense of distance trick the eye in a good way. A path disappearing into trees, an open sky with drifting clouds or a beach with a long horizon line all suggest space beyond the wall. In a small bedroom or living room, that effect can make the room feel more relaxed and less boxed in.

On the other hand, a bold, close-up botanical or a dark, moody print brings the wall forward and makes a big, echoing room feel cozier. Matching the image to the room's size is one of the first things we talk about.

Measuring before you buy

The most common mural mistake happens at checkout. Ordering a mural that is too small leaves a strip of bare wall; ordering one without extra bleed means the trim cuts into important parts of the image. Walls in older homes are rarely perfectly square, so we measure at several points and note any lean or slope.

From those measurements, we recommend the order size and tell you where outlets, switches, windows and vents will interrupt the picture. For custom prints, that lets you adjust the composition before printing.

  • Multiple width and height readings
  • Locations of outlets, switches and vents
  • Ceiling and floor line irregularities
  • Recommended bleed on every edge

Prepping plaster and drywall

Murals reproduce photos and artwork in fine detail, which means any crack or bump in the wall shows up in the image. Many West Park homes have plaster over concrete block on exterior walls and drywall on interior partitions. We fill cracks, patch holes and sand both surfaces smooth, then seal with a wallcovering primer.

If the mural is going on an exterior-facing wall, we check for dampness first. Block walls can let moisture through during heavy summer rains, and a mural on a damp wall is likely to bubble or lift.

Installing panel by panel

We unroll all panels in order on the floor to check numbering and print quality. The first panel is set against a level or plumb line, and each panel after it is aligned at the image itself, matching lines, edges and colors rather than relying only on the paper edge. Depending on the product, we paste the wall or the panel, following the manufacturer's directions.

Cutouts around outlets and trim are made slowly. Mural panels are one of a kind, so there is no replacement strip to fall back on if a cut goes wrong.

Which mural material to choose

Non-woven murals are our usual recommendation for bedrooms and living rooms. They are stable in changing humidity, easy to align and simple to remove later. Vinyl murals are tougher and washable, a good choice for playrooms and hallways. Traditional paper murals look rich but need more care in damp conditions.

Peel-and-stick versions are handy for renters, though they adhere best on very smooth, primed walls in steadily air-conditioned rooms. In South Florida, where humidity climbs every summer and storms are frequent, consistent indoor climate makes a noticeable difference.

Ideas homeowners ask about

Popular choices include tropical leaves, soft watercolor landscapes, vintage world maps, starry skies for kids' rooms, city skylines for teen rooms and abstract color washes for offices. Custom murals from family photos or a favorite piece of art are also possible when the image file is high resolution.

More services in West Park

Related

What to expect

How a visit goes

  1. Honest product advice

    We tell you how a paper will handle humidity, sunlight and cleaning in your specific room before you order it.

  2. Prep that is not skipped

    Repairs, skim coating and the right primer come before installation, so seams stay tight and future removal stays easy.

  3. Clear communication

    You know the plan, the prep needed and what happens each day, with no guessing about where the job stands.

FAQ

Common questions

Can you install a mural I already purchased?

Yes. We will review the panels and the wall before starting to make sure everything fits.

Will a mural work in a small room?

Often it works especially well, since images with depth can make a compact room feel more open.

Do I need to repair my walls before a mural?

Usually some prep is needed. Cracks and bumps show through printed images, so we smooth and prime first.

How long does mural installation take?

One wall typically takes part of a day, plus any time needed for repairs to dry.

Do you hang murals near West Park?

Yes. We also work in Pembroke Park, North Miami Beach, North Miami, Opa-locka and Miami Lakes.

Tell us about your room

Send a few photos of the walls and the paper you have in mind, and we will explain how we would prep and hang it.

(561) 823-3201
Call (561) 823-3201 Request Service